SATO PW208NX - Page 123

120
Mobile printer PW208NX/PW208mNX
Starting Up the Printer
Boot Version
Information > Build Version > Boot Version
Shows the boot version of this printer as follows:
1 Disks Shows the Disks.
2 Warp!!-mode Enable or disable the Warp!!-mode.
3 Release Date Shows the build date of the boot version.
Print Module
Information > Print Module
Shows the information about the print module of this printer as follows:
1 Boot Shows the Boot rmware version.
2 Main Shows the Main rmware version.
Main
Information > Print Module > Main
Shows the information about the main rmware of this printer as follows:
1 Name Shows the Main rmware name.
2 Release Date Shows the Main rmware release date.
Sensor Module
Information > Sensor Module
Shows the information about the Sensor Module of this printer.
1 Boot Shows the Boot rmware version.
2 Main Shows the Main rmware version.
Boot
Information > Sensor Module > Boot
Shows the information about the boot rmware of this printer as follows:
1 Name Shows the Boot rmware name.
2 Release Date Shows the Boot rmware release date.
3 Checksum Shows the Boot rmware checksum.