10
Mobile printer PW208NX/PW208mNX
Safety Precautions
A tip before use
If you write down the start date on the “Start Date” column on the sticker on the battery, you will know when to replace
the battery.
Place the printer on a surface that is at and level.
• Do not place the printer in an unlevel or slanted place.
Doing so could cause falling.
Do not put the printer on a location that produces vibration.
• When keeping the printer, avoid a location subject to vibration.
Keep the printer out of high temperature and humidity.
• When using or keeping the printer, avoid a location with high temperature or humidity. High temperature and humidity
may cause the decrease of life span of the printer. (Recommended temperature: 10 to 30°C (50 to 86°F)
Avoid dust.
• Do not put the printer on a location exposed to dust. It may cause failure or the decrease of life span of the printer.
Do not supply power near from a heater or refrigerator.
• Do not supply power from the power source near an electrical device that requires a measurable amount of power.
Voltage reduction may cause malfunction or defect.
Precautions for Handling
To Next Page
Loading...
