SATO PW208NX - Applications Menu

90
Mobile printer PW208NX/PW208mNX
Starting Up the Printer
2.6.4 Applications Menu
In the Applications menu, the setting items are as follows:
Applications
1 Protocol Set the protocol the printer uses.
2 SBPL Set the SBPL printer commands.
3 SZPL Set the SZPL printer commands.
4 SCPL Set the SCPL printer commands.
5 SPOS Set the SPOL printer commands.
Protocol
Applications > Protocol
Set the protocol the printer uses.
Initial setting : SBPL
Setting options : SBPL, SZPL, SCPL, SPOS
SBPL: Set when you use the SBPL printer command.
SZPL
: Set when you use the SZPL printer command,
SCPL: Set when you use the SCPL printer command.
SPOS: Set when you use the SPOS printer command.
SBPL
Applications > SBPL
To use SBPL as the printer command, set the following items:
* For details of SBPL commands, contact your SATO reseller or technical support
center.
1 Show Error Enable or disable the command error indication.
2 Standard Code Set the protocol code (control code).
3 Orientation Set the layout for printing.
4 Font Settings Set the font.
5 Compatible Set the compatible code.