SATO PW208NX - Page 92

Starting Up the Printer
89
Mobile printer PW208NX/PW208mNX
Full Charge P-Off
Battery > Fully Charge Power-Off
Set up the printerʼs power-off function after charging is complete.
While the printer is paused in printing (online) or ofine (stop) screen, the printer
powers off 3 seconds after it completes charging.
Initial setting : Enabled
Setting options : Enabled, Disabled
Enabled : The printer powers off automatically after it completes charging.
Disabled : The printer does not power off automatically after it competes
charging.
Conditions to disable the Fully-Charge Power-Off function
• While the printer is printing or feeding the media.
• While the printer button is being used.
• During adjustment or setting mode.
• While the printer receives the data.
• When the temperature in the printer exceeds the tolerance range (error 1065).
• When an AC adapter is removed.
Note
When using the printer being set on the charging cradle, set Full Charge P-Off
to Disabled.