SATO PW208NX - Information Menu

Starting Up the Printer
119
Mobile printer PW208NX/PW208mNX
2.6.7 Information Menu
In the Information menu, there are display items as follows:
In the Information menu, you cannot change a setting in the display items.
Information
1 Build Version Shows the rmware version.
2 Applications
Shows the versions of the installed applications in the
printer.
3 Installation Log
Shows the installation log date. (Not visible without log
data)
4 Print Module Shows the print module information.
5 Sensor Module Shows the Sensor module information.
6 Counters Shows the counter information.
7
Active printing
Shows the setting information of the active printing
operations.
8
IPv4 Address
Shows the IPv4 Address. (Wireless LAN model)
9
IPv6 Address
Shows the IPv6 Address. (Wireless LAN model)
This item is not displayed when Wi-Fi Direct is
selected.
10 Wi-Fi MAC Shows MAC address of the wireless LAN. (Wireless
LAN model)
11 Wi-Fi Region Shows the region information of the wireless LAN.
(Wireless LAN model)
12 Wi-Fi Status Set the wireless LAN Status. (Wireless LAN model)
13 Wi-Fi Direct Shows the connection information of the Wi-Fi Direct
only if the printer is connected to the Wi-Fi Direct.
14 Wi-Fi Versions Shows the wireless LAN Version. (Wireless LAN
model)
Build Version
Information > Build Version
Shows the information and version of this printer.
1 Name Shows the name of the build version.
2 Date Shows the date of the build version.
3 Checksum Shows the checksum of the build version.
4 Kernel Version Shows the kernel version.
5 Boot Version Shows the boot version.