SATO PW208NX - How to See the Command Error Information

136
Mobile printer PW208NX/PW208mNX
Troubleshooting
3.2.1 How to See the Command Error Information
When an error occurs with the printer, an error number and error content appears alternately on the screen.
Check the cause and countermeasure, and then take appropriate action.
For details of the error, check the “Caaa: <bb>: cc” display on the error content screen.
• Caaa: position of error occurrence
• <bb>: error command name
• cc: error content
Location of Error Occurrence
“Caaa” in the command error message shows the location where a command error occurs.
The number of ESC commands from ESC+A is shown in “aaa”.
Note that the ESC+A command is not included in the number of ESC commands, which can be shown up to
999.
Example: When a command error is detected in the Horizontal Print Position <H> command.
------: [ESC]A
C001: [ESC]V100
C002: [ESC]H99999 ←This is the location of the error.
C003: [ESC]L0202
C004: [ESC]X21,ABCDEF
C005: [ESC]Q1
C006: [ESC]Z
In this case, C002 is the location of the error.
Error command name
The command name is shown in “<bb>”. An error is detected in the command name.
A one-byte command name is left aligned.