Troubleshooting
137
Mobile printer PW208NX/PW208mNX
Error description (codes)
The cause of a command error appears in “cc” in the error message (“Caaa: <bb>:cc”).
Description (“cc”) Cause
01 Improper command is detected.
02 Improper parameter is received.
03 The printer failed to read the command table.
04 Improper graphic and custom designed data are detected.
05
• Specied registration area is inappropriate.
• Tried to write to write-protected media.
06 Number specied by registration command has already been taken.
07 Exceeded the registration area. (Memory Full)
08 Data not registered.
09 The specied print start position is outside the printable area.
10 The printing image is outside the printable area. (Barcode only)
21 The QR code that cannot be generated is specied.
22 Improper ETX is received after STX has been received.
To Next Page
Loading...
