SATO PW208NX - Page 108

Starting Up the Printer
105
Mobile printer PW208NX/PW208mNX
Password
System > Password
To set the password, the setting items are as follows:
1 Password Enable Enable or disable the password function.
2 Install Security Enable or disable the password input for the package le
download.
3 NFC Security Set the security when writing the settings to the NFC
interface.
4 Change Pwd Change the password.
Password Enable
System > Password > Password Enable
Enable or disable the password function.
If you have set the password to Enabled, the specied password is required when
you enter the Settings menu after starting up the printer or after a certain period from
switching from the settings mode to the normal mode.
Initial setting : Disabled
Setting options : Enabled, Disabled
Enabled : Enable the password setting.
Disabled : Disable the password setting.
Note
The default password is 0310. You can change the password in Password >
Change Pwd > level1.