4
Mobile printer PW208NX/PW208mNX
Safety Precautions
■ Do not use other than the specied voltage
• Do not use other than the specied voltage. Doing so could result in re or electric shock.
■ Do not put objects inside the product
• Do not insert or drop in metal or burnable objects inside the product’s openings (cable outlets,
etc.). If foreign objects do get inside the product, immediately turn off the power switch, unplug
the power cord from the outlet, and contact your SATO reseller or technical support center.
Using the product in this condition could cause a re or electric shock.
■ Handling the power cord
• Do not damage, break, or modify the power cord. Also, do not place heavy objects on the
power cord, heat it, or pull it because doing so could damage the power cord and cause a re
or electric shock.
• If the power cord becomes damaged (core is exposed, wires broken, etc.), contact your SATO
reseller or technical support center. Using the power cord in this condition could cause a re or
electric shock.
• Do not modify, excessively bend, twist, or pull the power cord. Using the power cord in such a
condition could cause a re or electric shock.
■ When the product has been dropped or broken
• If the product is dropped or broken, immediately turn off the power switch, unplug the power
cord from the outlet, and contact your SATO reseller or technical support center. Using the
product in this condition could cause a re or electric shock.
■ Do not use the product when something is abnormal about it
• Continuing to use the product in the event something is abnormal about it, such as smoke
or unusual smells coming from it, could result in re or electric shock. Immediately turn off
the power switch, unplug the power cord from the outlet, and contact your SATO reseller
or technical support center for repairs. It is dangerous for the customer to try to repair it, so
absolutely do not attempt repairs on your own.
■ Do not use in hazardous locations
• The product is not explosion proof certied.
Do not use in a potentially explosive environment or atmosphere.
■ Do not set on an unstable area
• Do not set on an unstable area, such as a wobbly table or slanted area or an area subject to
strong vibration. If the product falls off or topples over, it could injure someone.
■ Do not place containers full of water or other liquid on the product
• Do not place ower vases, cups, or other containers holding liquids, such as water or
chemicals, or small metal objects near the product. If they are spilled and get inside the
product, immediately turn off the power switch, unplug the power cord from the outlet, and
contact your SATO reseller or technical support center. Using the product in this condition
could cause a re or electric shock.
To Next Page
Loading...
