Starting Up the Printer
67
Mobile printer PW208NX/PW208mNX
Dispenser Mode
Printing > Advanced > Dispenser Mode
For PW208NX:
For PW208mNX:
Set the dispenser motion.
Initial setting
: Auto (PW208NX)
None (PW208mNX)
Setting options : Auto (PW208NX only), Manual (PW208mNX only), None
Auto: When the print mode is set to Linerless or Dispenser (PW208NX only)
(
page 30), the printer starts next printing automatically after the
printed media is removed.
Manual:
When the print mode is set to Linerless, press
button to start next
printing.
None:
When the printer mode is set to Linerless, the printer keeps on printing
until all the received data is printed.
Note
When None is selected in the Dispenser mode, the printer operates in Auto
mode.
To Next Page
Loading...
