SATO PW208NX - Page 83

80
Mobile printer PW208NX/PW208mNX
Starting Up the Printer
Flow Control
Interface > Network > Services > Ports > Flow Control
Set the communication protocol.
Initial setting : Status4
Setting options : Status4, Status3, None
LPD
Interface > Network > Services > LPD
Set up the functions for LPD.
Initial setting : Enabled
Setting options : Enabled, Disabled
Enabled: Enable the functions for LPD.
Disabled: Disable the functions for LPD.
DNS Lookup
Interface > Network > Services > LPD > DNS Lookup
Enable or disable the DNS Lookup function.
Initial value : Disabled
Setting options : Enabled, Disabled
Enabled: Enable the DNS Lookup function.
Disabled: Disable the DNS Lookup function.
FTP
Interface > Network > Services > FTP
Set up the functions for FTP.
Initial setting : Disabled
Setting options : Enabled, Disabled
Enabled: Enable the functions for FTP.
Disabled: Disable the functions for FTP.