SATO PW208NX - Page 97

94
Mobile printer PW208NX/PW208mNX
Starting Up the Printer
Compatible
Applications > SBPL > Compatible
Set the compatible code for SBPL.
1 CODE128(C)
2 Call Font/Log
3 QTY Timing
4 Character Pitch
CODE128(C)
Applications > SBPL > Compatible > CODE128(C)
Set whether the printer allows an odd-number digit and performs printing by zero-
lling the number, when the start code of CODE128 is C.
Initial setting :
Disabled
Setting options
:
Enabled, Disabled
Enabled
:
Allow odd-number digit and perform printing with zero-lling the
number.
Disabled
:
Odd-number digit is not allowed. A command error occurs and
barcode is not be printed.
Call Font/Log
Applications > SBPL > Compatible > Call Font/Logo
Set how to process the character code specied by printing order command (ESC-RF)
in calling font/logo.
Initial setting : Disabled
Setting options : Enabled, Disabled
Enabled : The character code is processed in little ending format.
Disabled : The character code is processed in big ending format.
QTY Timing
Applications > SBPL > Compatible > QTY Timing
Set the compatibility in timing to update QTY.
Initial setting :
Disabled
Setting options
:
Enabled, Disabled
Enabled
:
QTY is updated after the printer completes printing.
Disabled
:
QTY is updated after the operation is complete when the Mode
is Dispenser or Tear-Off. Even after the printer does not print
because of an error, QTY is updated.