Is the handset too far away from the base unit?
D
oes “Out of Range” or “No Connection” appear?”
Is the battery pack weak? Charge the battery on the
base unit for about 15 hours.
The phone does not ring
Check the RINGER setting.
Cannot dial
Do you have touch tone service?
Check the TONE/PULSE setting.
The audio sounds scratchy
Is the base unit located next to metal objects or
appliances? Try relocating the base station. See page 6
for tips on location.
CALLER ID doesn’t work
Do you have CALLER ID service?
No caller’s name Does the CALLER ID service to which you subscribed
include the CALLING NAME DELIVERY feature?
You cannot hear or be heard
clearly
Increase the handset receiver volume.
Caller’s information is not
registered
Did you or your answering machine answer calls before
the second ring?
Interference from wireless
networking device
Change the location of the wireless networking device
and/or the base of the cordless phone.
Switch the channel on the wireless networking device.
Please refer to the manual of your wireless networking
device, or consult a qualified technician of how to switch
the channel. For optimum results, switch to a mid
transmit range channel (e.g. channel 6 at 2.437GHz).
SAVE THESE INSTRUCTIONS.
T R O U B L E S H O O T I N G
To Next Page
Loading...