– 70 –
Scanreco – Service Manual G6 Radio Remote Control System
8.3. Receiver Level
The receiver is developed with Scanreco Never-Stop Technology™ and expected to work for
many years even in tough conditions. It is potted with a molding compound to protect against
dust and water which makes the receiver maintenance free. The only part that can be replaced
is the external antenna.
WARNING!
When replacing a broken receiver with a spare receiver, you must load the correct parameter file from
Modulate to the receiver. This is to enable and secure the correct system functionality.
!
NOTICE!
The radio module and main board in the receiver cannot be replaced since it is potted. If they fail the
entire receiver must be replaced.
i
To Next Page
Loading...