Scantron SelfScore - Transport Bed Closed View

Chapter 1: Scanner Basics
Operator’s Guide 3
Transport Bed Closed View
Component Function
Adjustment bar Stops the sheet in the output tray as the sheet leaves the
transport bed. Prior to scanning, the adjustment bar needs to be
adjusted to the length of the sheets being scanned.
Buttons Enable you to start and stop the scanner and perform other menu
driven functions.
Display panel Displays messages from the scanner and the host computer.
Shows the status of the scanner and provides messages on how
to change the status and resolve a scanner condition.
Input tray lever Retains the input tray in the down position for easy loading of
sheets. The input tray lever must be released for scanner to
function properly.
Input trays
(upper and
lower)
Hold up to 100 sheets of paper for scanning. The lower input tray
rises automatically as sheets feed. The upper tray has a pocket to
hold the Quick Tips guides.
Output tray Holds up to 100 sheets after they have been scanned.
Paper guide Aligns sheets in the input tray. Prior to scanning, the paper guide
should be manually adjusted to the width of the sheets being
scanned.