Operator’s Guide 69
menu item.
Bot Read Validation
NOTE: This menu item displays only if your scanner is
equipped with a bottom read head.
Description
This menu item allows you to validate the calibration
and operation of the bottom read head.
Refer to the instructions for Top Read Validation above
with the following exception:
Place the Calibration Sheets in the input tray so that
the words “Scantron Reflective” are face down and
enter the scanner last.
Exiting the Background Menu
Description
After you have navigated through the background
menu, the menu item shown above appears.
Press Enter to re-enter the background menu.
Press Exit to exit the background menu.
To Next Page
Loading...
