Chapter 2: Setting Up Your Scanner
Operator’s Guide 25
Turning the Scanner On
CAUTION: If you are connecting the scanner to a
computer, do not turn on the scanner
before installing the scanner utilities
software. Doing so may result in incorrect
drivers being loaded.
1. Press the switch on the back of the scanner to turn
the scanner on (l).
2. After you turn on the scanner, wait for it to
complete the self-test. The message “Initializing...”
will appear on the display panel. After a few
seconds, another message will appear indicating
what action needs to be taken next.
To Next Page
Loading...
