Chapter 3: Operating Your Scanner
Operator’s Guide 35
Clearing Document Jams
If documents jam during scanning, the display panel
will display an error message. You can use the
following general procedure for clearing jams, or see
the chapter on display panel messages in the Scanning
Tests, Surveys, and Ballots Using SelfScore guide
(included with your scanner) for more information on
the specific error message that you received.
1. Lift the following:
• Sheet deflector
• Read head
• Printer cover
2. Remove any sheets on the transport bed.
3. Close all covers making sure that each is fully
seated.
4. Return any unscanned sheets to the input tray.
5. Press START to resume scanning.
To Next Page
Loading...
