Operator’s Guide 71
Chapter 6: Transport Printers
This chapter covers setting up and using the dual
transport printers for SelfScore scanners.
IMPORTANT: Remove the cartridges from the printers
and store in a sealed container in a cool
place if:
• The scanner is not going to be used for a period
greater than two weeks.
• The scanner is going to be transported.
• The scanner is going to be turned off or
unplugged. (It is not necessary to remove the
cartridge when allowing the scanner to go into
Energy Star sleep mode.)
6
In this chapter:
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . .6-72
Installing or Replacing an Ink Cartridge . . .6-72
Positioning the Printers . . . . . . . . . . . . . . . . . .6-75
Testing the Printers. . . . . . . . . . . . . . . . . . . . . .6-78
Cleaning the Cartridge Holder. . . . . . . . . . . .6-81
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . .6-83
To Next Page
Loading...
