Scantron SelfScore - Page 73

Operator’s Guide 63
Comm Config - Display
Variables
Where <Scanner Model>=
• SelfScore
Description
This menu item allows you to display the
communications configuration.
Press Next to skip this function and advance to the
next menu item.
Press Display if you want the scanner to display each
of the communications parameters on the display
panel. There are a total of 35 parameters.
Press Show Next to show the next parameter.
Press Next at any time to abort the function and
advance to the next menu item.
Display Brightness
Description
This menu item allows you to adjust the display
brightness.
Press Next to advance to the next menu item.
Press Change to increment the display brightness until