BASCSOUL_EN
V02 | 10.2017
47
www.schaerer.com
Operation
Filling the powder container
5.6.4 Best Foam™ milk system
Side or under-machine cooling unit
Ensure that the filled choco or topping powder does not touch the closed powder container cover.
► Remove the cover from the powder container.
► Carefully refill the powder container.
► Reattach the powder container cover.
The powder does not touch the cover.
See also "Operation" -- "Operating elements on the machine" - "Interior machine operating elements" to unlock the
powder container.
► Open the side cooling unit door.
► Remove the milk hose adapter [A] from the milk container cover.
► Pull out the milk container [B] and lift the cover.
► Rinse out the milk container, suction pipe and cover with fresh water.
► Pour in milk, observing the max. fill level of 8 l [C ].
The milk does not touch the cover.
► Close the milk container with the cover and slide it back into the side cooling unit.
► Attach the milk hose adapter to the milk container cover.
► Close the cooling unit door.
Check the cooling temperature of 3 – 5 °C regularly.
To Next Page
Loading...
