Schaerer Coffee Soul - Dispensing Beverages; Positioning Beverage Outlet

www.schaerer.com
Operation
BASCSOUL_EN
V02 | 10.2017
48
5.7 Dispensing beverages
5.7.1 Positioning beverage outlet
The beverage outlet can be manually adjusted to the required cup size.
Beverage outlet in low position [A] [65 mm] e.g. for espresso
Beverage outlet in high position [A] [185 mm] e.g. for latte macchiato
See "Operation" - "Switching on" - "Side or under-machine cooling unit".
CAUTION
Contamination in the milk pump can lead to health problems.
Cleaning must be done after installation, commissioning or recommissioning.
Run the display-guided cleaning programme before dispensing the first beverage.
See "Cleaning" - "Daily machine cleaning" - "Display-guided cleaning programme"
CAUTION
Danger of scalding during beverage dispensing!
Manually position the beverage outlet to the required cup size.
Do not reach under a beverage outlet while a beverage is being dispensed!
► Lead the beverage outlet to the cup using the handle [B].
► Slide the beverage outlet all the way up using the handle [B].
► Lead the beverage outlet to the cup or glass using the handle [B].