BASCSOUL_EN
V02 | 10.2017
87
www.schaerer.com
Service and maintenance
Starting the descaling process
Removing the decalcification cartridge
Removing the cleaning container from the cooling unit
The descaling process takes at least 85 min. The Pause field [II] interrupts the descaling process. The descaling
programme can be cancelled with the [X] field up to and at step [8].
9b) ► Start the descaling process with the [A] [>] field.
The descaling progress is shown in [%].
The descaling process ends after ca. 85 min.
10) [A] The machine starts to cool down (blue).
[B] Descaling (yellow) is active.
[C] Rinsing (green) is active.
The descaling process can be interrupted with the [II] field and continued with the [>]
field.
11)
12)
The descaling process is complete.
► Remove the decalcification cartridge from machine.
Instruction, replace the safety cap.
► Replace the green safety cap.
► Closing the left front cover
► Select the [>] field for the next step.
Instruction, remove cleaning container.
13) ► Remove the cleaning container from the cooling unit, empty and clean it.
► Select the [>] field for the next step.
Instruction, place milk container back in cooling unit.
To Next Page
Loading...
