19 Attachment
EN-US · 30.30.00.00424 · 07 · 10/23 73 / 86
Code Parameter Comment
-iH
Vacuum level in inHg The displayed vacuum is shown in inches of Hg.
dLY
Switch-off delay Setting the switch-off delay for OUT2 (delay)
dPY
Display rotation Setting the display position (rotation)
5td
Default display Display is not rotated
Red
Rotated display Display is rotated by 180°
Eco
Eco mode Setting Eco mode
Pin
PIN Entry of the PIN for unlocking the menu
Loc
Menu locked Parameter modification locked.
Unc
Menu unlocked The buttons and menus are unlocked.
rE5
Reset All adjustable values are reset to the factory settings.
FFF
Vacuum measurement
range
Present vacuum exceeds the measurement range.
-FF
Vacuum circuit over-
pressure
Overpressure in vacuum circuit; this normally happens exclusively
in Blow off mode.
To Next Page
Loading...
