Schwank Control Touch - Control Unit Factory Settings

Revision: 3.0 Page 62 of 70
12.3. Control unit factory settings
Setting the factory settings: Configuration - More - Control unit factory settings
General
 Customer PIN:
 4711
 Time until chimney sweep mode ends
automatically:
 120min
 Time:
 Current time
 Daytime saving not activated
 Time zone adjustment not activated
 Language:
 English
 Time programs:
 [Time] Program 1:
Monday to Friday, 7:00 - 16:30
 Set in zone1:
Automatic mode with holiday period
[Time] Program 1
 Temperatures:
 Day: 17°C
 Night: 15°C
 Antifreeze: 5°C
 Holiday:10°C
 Humidity: Off