Sea-doo 2004 3D RFI Shop Manual

Section 14 STEERING SYSTEM
Subsection 01 (STEERING SYSTEM)
1
F22K22A
1. Wiring harness routing
1
F22K23A
1. Throttle cable routing
Secure throttle cable to steering support with
clamp no. 41.
F22K25A
Handlebar and Adjuster
When installing blocks no. 14 on handlebar, en-
sure to position block pin into handlebar hole.
NOTE: Block must be centered on handlebar. If
not, it is in reverse position.
F22K1WA
smr2004-3D 75
www.SeaDooManuals.net

Sea-doo 2004 3D RFI Specifications

General

Brand	Sea-doo
Model	2004 3D RFI
Category	Boat
Language	English