Seastar Solutions Optimus 360 Installation Manual

4-2
© 2014 SeaStar Solutions Optimus 360 Installation Supplement, Rev. B
2. Press > to enter the Select System Type menu.
3. Use the down arrow button to select the appropriate system, then
press Save or
to return to the System Setup menu. When you
set the system type the CANtrak automatically configures the menus
to show only items that relate to your system.
4. Choose Select Number of Devices and press >. The devices you
see in this list may not match the figure. The available selections
will change based on the system type you specified previously.
5. Use the + and – buttons to change the quantity of each device
to match your system. Press Save or
when finished to return
to the System Setup menu.
6. Review Appendix E in Book 50 and determine if your system
software needs to be updated.
Figure 4-2.
Figure 4-3.

Seastar Solutions Optimus 360 Specifications

General

Brand	Seastar Solutions
Model	Optimus 360
Category	Automobile Electronics
Language	English