Seastar Solutions Optimus 360 Installation Manual

9-17
© 2014 SeaStar Solutions Optimus 360 Installation Supplement, Rev. B
9.3.3
9.3.4
Updating Joystick Firmware
In general, system firmware should always be updated using the
'Update All' utility described in Appendix E of the Optimus EPS
Installation Manual (Book 50).
If you have a situation in which you feel you need to update the
joystick firmware on its own, please contact SeaStar Solutions
technical support.
Basic Import Procedure
1. Connect all destination joysticks to the network. On the CANtrak,
navigate to Dealer Menu > Settings > Joystick > Import Settings.
2. The display will show a list of available .xcu files on your USB
drive. Find the one you want to use and press Select.
3. At the confirmation prompt, press Yes to continue. The joystick
tuning file will be imported to all connected joysticks.
4. Press
repeatedly to exit. You will be prompted to cycle power.
Turn the ignition off, wait at least five seconds, then turn it
on again.

Seastar Solutions Optimus 360 Specifications

General

Brand	Seastar Solutions
Model	Optimus 360
Category	Automobile Electronics
Language	English