Making the device operational • 23
4.5 Operation using a seca 360° stadiometer
As an alternative to manual entry, you can use a seca 360° stadiometer to
determine height and transfer the height to the device via
seca 360° wireless
network.
Height is taken into account when analyzing the bioimpedance measurement.
If the device is connected to the
seca 115 PC software, height is recorded
together with the other measured results in a seca patient file and transmitted
to the
seca 115 PC software.
The steps below are necessary.
• Setting up
seca 515/514 and establishing a power supply
• Setting up
seca 360° stadiometer
• Setting up the seca 360° wireless network
Details on the steps mentioned can be found in the section entitled “Configur-
ing the device” from page 28 and in the instructions for use for the
seca 360°
stadiometer and in the Administrator Manual for the seca 115 PC software.
To Next Page
Loading...
