Seca 514 - Automatic Standby and Switching Off

Operating concept • 27
English
5.8 Automatic standby
The device automatically switches to standby if there are no entries on the
device for 5 minutes. This has the following effects:
• measured results and settings which have not been saved are lost.
• the user currently logged in is automatically logged out.
• the LED of the ON/OFF button is green.
• the touchscreen display goes out.
5.9 Switching off the device
WARNING!
Electric shock
The device cannot be de-energized by pressing the ON/OFF button.
► Always take out the power supply plug if the device needs to be
de-energized - e.g. for a hygiene treatment.
► Press the ON/OFF button briefly.
The LED of the button turns green. The touchscreen display goes out.
The device is on standby.
► Press and hold the ON/OFF button
The LED of the button goes out. The touchscreen display goes out. The
device is switched off.
NOTE:
When switching on again from standby, the
weight/height tab is active
immediately. When switching a device which has been switched off
back on again, the internal PC boots up again. This takes several
seconds.