40 •
Setting up the seca 360° wireless
network
Use the wireless network function to link other seca 360° devices, e.g.
stadiometers, to the seca 515/514 device wirelessly.
NOTE:
► If you wish to link the device to the seca 115 PC software, set up the
seca wireless network from the PC software. Further information
can be found in the Administrator Manual for the PC software.
► For faster data transmission, we recommend connecting the device
via Ethernet to the PC on which the
seca 115 PC software is in-
stalled. For information about this, see this document from page 37
and the Administrator Manual for the
seca 115 PC software.
► A description of the functional principle of the seca wireless network
can be found in the section entitled “Technical information” from
page 56.
To set up a seca 360° wireless network, proceed as outlined below.
1. Ensure that all devices you wish to connect to the
seca 515/514 device are
switched off.
2. Call up the administrator menu on the
seca 515/514 device.
3. In the pull-down menu, select the
wireless network element.
The wireless network dialog window appears.
4. In the
send & receive line, press the on button.
5. In the wireless group line, press the set up button.
6. Press the desired wireless group (in this case wireless group “0”).
The program will suggest three channels.
To Next Page
Loading...
