Sega VIRTUA COP - Page 103

94
www.seuservice.com
95
www.seuservice.com
No sound is emit-
ted.
Control Unit
sighting is not
satisfactory.
During game play,
the Control Unit
is not operable for
shooting.
The weapon
change button
does not function
properly.
The Fluorescent
lamp does not
light up.
The Lamp does
not light up.
Sound volume adjustment is not ap-
propriate.
Board and Amplier malfunctioning.
Due to environmental changes, etc.,
sighting became inappropriate.
LED BD malfunctioning.
Sensor Unit malfunctioning.
LED board and LED board cover are
contaminated.
Malfunctioning of microswitch.
Malfunctioning of LED BD.
Malfunctioning of Sensor Unit.
Microswitch malfunction.
The Fluorescent tube is burnt out.
Lamp malfunctioning.
Adjust sound volume
Perform the sound test and conrm
.
Perform sighting adjustment in the test
mode .
Check to ensure that the LED lights up. If
it does not light up, replace .
Replace the Sensor Unit .
Wipe off soiled surfaces
Check for ON and OFF in the INPUT test
and if it is not functioning, replace the mi-
croswitch .
Check if the LED is lit, and if it is not lit,
replace .
Replace the Sensor Unit.
Perform the input test to check that the but-
ton switches ON and OFF properly. If the
button is not functioning properly, replace
the microswitch .
Replace the Fluorescent tube
Replace the Lamp .
TABLE 15. 1 b
PROBLEMS CAUSE COUNTERMEASURES