82
www.seuservice.com
TEST MODE WRITING
POSITION
ADJUST
SELECT
RESET
R BG
PIC-ADJ
SET
P
WRITING
ADJUST
SET
PIC-ADJ
PIC-ADJ
(1) Press either
or PIC - ADJ button.
The on-screen menu will have
one item in purple and 6 items
in white.
(2) Choose BRIGHTNESS by using either
or
PIC - ADJ button.
Have the BRIGHTNESS
displayed in purple.
When the selection of the
BRIGHTNESS adjustment
mode is decided, the
adjustment data scale bar
appears on the screen.
(3) Press the SET button (to decide selection).
(5) Press the WRITING button (for storing and
nish).
(4) Make adjustment by using either or
ADJUST button.
When discontinuing the adjustment, choose EXIT from the menu at the stage of procedure and press the
SET button.
To continue adjusting other menu items, repeat procedure.
Unless the adjustment data is stored, the data in the adjusted status will be erased at the time the power is
turned off and the pre-adjustment status will remain when the power is turned on next time.
The WRITING display appears
and the adjustment data is
stored.
As the Cursor is moved, the
adjustment data value changes.
Make adjustment so as to
obtain the desired on-screen
brightness status.
Although the on-screen picture quality has been adjusted at the time of shipment from the
factory, readjustment can be made if desired. When the Game Board is replaced, readjustment
may be necessary. Changing the BRIGHTNESS causes the brightness of the on-screen images
of black portions to be changed.
ADJUSTING THE SCREEN BRIGHTNESS