18
www.seuservice.com
ASSEMBLING THE CABINET
FIG. 6. 2 a
There are 4 cord clamps in the PTV front.
By using the 4 cord clamps, secure the
wiring as per the Figure. (FIG. 6. 2 b)
Mount the PTV onto the PTV Cabinet.
Lift the PTV by 3 or more workers while
another worker supporting the PTV
Cabinet. Be careful so as not to damage
wiring at this time.
For performing work,
use 4 or more workers.
FIG. 6. 2 b
FIG. 6. 2 c
Move the PTV to the rear of the PTV Cabinet.
Connect wiring between the PTV and the PTV Cabinet.
Connect the Connector.
Connect the Connector.
2
To Next Page
Loading...
