83
www.seuservice.com
TEST MODE WRITING
POSITION
ADJUST
SELECT
RESET
R BG
PIC-ADJ
SET
P
WRITING
ADJUST
SET
PIC-ADJ
PIC-ADJ
(1) Press either
or
PIC - ADJ button.
The on-screen menu will have
one item in purple and 6 items
in white.
(2) Choose H. POSI or V. POSI by using either
or
PIC - ADJ button.
When the selection of the
H. POSI or V. POSI is decided,
the adjustment data scale bar
appears on the screen.
(3) Press the SET button (to decide selection).
(5) Press the WRITING button (for storing and
nish).
(4) Make adjustment by using either or
ADJUST button.
When discontinuing the adjustment, choose EXIT from the menu at the stage of the second procedure and
press the SET button.
To continue adjusting other menu items, repeat procedure.
Unless the adjustment data is stored, the data in the adjusted status will be erased at the time the power is
turned off and the pre-adjustment status will remain when the power is turned on next time.
Have the H. POSI or V. POSI
displayed in purple. The Figure
shows the status in which
H. POSI is selected.
When making adjustments
in vertical directions,
also use either or
ADJUST button.
The WRITING display appears
and the adjustment data is
stored.
As the Cursor is moved, the
adjustment data value changes.
Make adjustment so as to
obtain the desired on-screen
position status.
Although the on-screen display position (H. POSI, V. POSI) has been adjusted at the time of
shipment from the factory, readjustment can be made if desired. When the Game Board is
replaced, readjustments may be necessary.
ADJUSTING THE ON-SCREEN DISPLAY POSITION
To Next Page
Loading...
Need help?
General
