EasyManua.ls Logo

Sega VIRTUA COP - Network Setting (Core)

Sega VIRTUA COP
160 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
62
www.seuservice.com
63
www.seuservice.com
NETWORK SETTING (CORE)
Use the SERVICE Button to move the cursor to the desired test item.
(When setting IP ADDRESS, SUBNET MASK, GAME WAY or PRIMARY DNS, use the
underline as a guide.)
Press the TEST Button to change the setting.
Move the cursor to EXIT and press the TEST Button to return to the SYSTEM MENU screen.
(A) REMOTE (C)
This sets up whether a communication setting is automatic or manual.
ENABLE: Sets the communication setting automatically.
DISABLLE: Sets the communication setting manually.
(B) IP ADDRESS (C)
This is one of the settings required for communication network. After setting the number, press
TEST Button on SET position to memorize the setting. If you set the REMOTE setting to
ENABLE, you cannot select this.
(C) SUBNET MASK (C)
This is one of the settings required for communication network. After setting the number, press
TEST Button on SET position to memorize the setting. If you set the REMOTE setting to
ENABLE, you cannot select this.
(D) GATE WAY (C)
This is one of the settings required for communication network. After setting the number, press
TEST Button on SET position to memorize the setting. If you set the REMOTE setting to
ENABLE, you cannot select this.
(E) PRIMARY DNS (C)
This is one of the settings required for communication network. After setting the number, press
TEST Button on SET position to memorize the setting. If you set the REMOTE setting to
ENABLE, you cannot select this.
(F) CURRENT
This displays the present setting value during a setup of each item [(B), (C), (D), (E)]. Pressing
TEST Button on SET position, the settings are memorized and the screen is changed.
Use the LAN PORT attached to the Main Board, and carry out the settings necessary for
network communication.
Note: This function is not available with this product.
����NETWORK�SETTING�(CORE)
->REMOTE(C)�������ENABLE
��IP�ADDRESS(C)
����---.---.---.---
��SUBNET�MASK(C)
����---.---.---.---
��GATE�WAY(C)
����---.---.---.---
��PRIMARY�DNS(C)
����---.---.---.---
��EXIT
����CURRENT�************
������***.***.***.***
�SELECT�WITH�SERVICE�BUTTON
���AND�PRESS�TEST�BUTTON
(A)
(B)
(C)
(D)
(E)
(F)

Table of Contents

Related product manuals