Sega VIRTUA COP - Adjusting the Screen Size

84
www.seuservice.com
85
www.seuservice.com
TEST MODE WRITING
POSITION
ADJUST
SELECT
RESET
R BG
PIC-ADJ
SET
P
CONTRAST
BRIGHTNESS
H.POSI
V.POSI
H.SIZE
V.SIZE
EXIT
CONTRAST
BRIGHTNESS
H.POSI
V.POSI
H.SIZE
V.SIZE
EXIT
H.SIZE 128
. . . . . . . . . . . . . . . . . . . .
H.SIZE 156
. . . . . . . . . . . . . . . . . . . .
WRITING
WRITING
ADJUST
SET
PIC-ADJ
PIC-ADJ
(1) Press either

or

PIC - ADJ button.
(2) Choose H. SIZE or V. SIZE by using either

or

PIC - ADJ button.
When the selection of the
H. SIZE or V. SIZE
adjustment mode is decided,
the adjustment data scale bar
appears on the screen.
(3) Press the SET button (to decide selection).
(5) Press the WRITING button (for storing and
nish).
As the Cursor is moved, the
adjustment data value changes.
Make adjustment so as to
obtain the desired on-screen
position status.
(4) Make adjustment by using either or
ADJUST button.
 When discontinuing the adjustment, choose EXIT from the menu at the second stage of the procedure and
press the SET button.
 To continue adjusting other menu items, repeat procedure.
 Unless the adjustment data is stored, the data in the adjusted status will be erased at the time the power is
turned off and the pre-adjustment status will remain when the power is turned on next time.
When making adjustments
in vertical directions, also
use either or button.
The on-screen menu will have
one item in purple and 6 items
in white.
Have the H. SIZE or V. SIZE
displayed in purple. The Figure
shows the status in which
H. SIZE is selected.
The WRITING display appears
and the adjustment data is
stored.
Although the on-screen size (H. SIZE, V. SIZE) has been adjusted at the time of shipment
from the factory, readjustment can be made if desired. When the Game Board is replaced,
readjustments may be necessary.
ADJUSTING THE SCREEN SIZE