Sega VIRTUA COP - Removing the Gd-Rom Drive

104
www.seuservice.com
105
www.seuservice.com
 Take off the 4 screws to remove the GD-ROM drive.
Take out the ASSY MAIN BD from the PTV cabinet; and then remove the GD-ROM drive from
the ASSY MAIN BD as follows:
 Carry out the "Removing the Game Board" procedures and remove the ASSY MAIN BD from
the cabinet.
 Remove the GD cable connector and the AC cable connector from the GD-ROM drive.
REMOVING THE GD-ROM DRIVE
PHOTO 16. 1 l
PHOTO 16. 1 m
GD CABLE CONNECTOR
AC CABLE CONNECTOR
SCREW (4)
M4×16, w/at & spring washers