Sega VIRTUA COP - Output Test; Gun Adjustment

40
www.seuservice.com
41
www.seuservice.com
OUTPUT TEST
Select OUTPUT TEST from the menu in the test mode to cause the screen (on which each lamp
and wiring connections are tested) to appear. Ensure that lamp light up satisfactorily.
Perform the above inspections also at the time of monthly inspection.
As for the gun adjustment described in Part (5) above, weekly conrm that the gun is properly
adjusted.
GUN ADJUSTMENT
Before starting the operation, play the game by yourself and make sure that the gun read-
justment is not needed and that you can play the game without a problem. Although completed
at the factory, the gun adjustment may be necessary because of the moving/shipping divergence.
����������OUTPUT�TEST
���PLAYER�1�START�LAMP���OFF
���PLAYER�2�START�LAMP���OFF
���PLAYER�1�FOOT�PANEL���OFF
���PLAYER�2�FOOT�PANEL���OFF
���PLAYER�1�BILLBOARD����OFF
���PLAYER�2�BILLBOARD����OFF
->�EXIT
���SELECT�WITH�SERVICE�BUTTON
�����AND�PRESS�TEST�BUTTON

  

���������������GUN�ADJUSTMENT
�����PLAYER�1���������������PLAYER�2
->�TOP�������5��233����->�TOP�������5��233
���LEFT���-318���17�������LEFT���-318���17
���CENTER��-10���15�������CENTER��-10���15
���RIGHT���242���34�������RIGHT���242���34
���BOTTOM��-10�-204�������BOTTOM��-10�-204
���DEFAULT����������������DEFAULT
���CANCEL�����������������CANCEL
���CURSOR�����������������CURSOR
���������SELECT�WITH�SERVICE�BUTTON
��������������AND�PULL�TRIGGER
���������PRESS�TEST�BUTTON�TO�EXIT