Sega VIRTUA COP - C.r.t. Test

38
www.seuservice.com
39
www.seuservice.com
C.R.T. TEST
In the TEST mode menu, selecting C.R.T.
TEST allows the screen (on which the pro-
jector is tested) to be displayed. Although
the projector adjustments have been made
at the time of shipment from the factory,
make judgment as to whether an adjustment
is needed by watching the test mode screen.
If it is necessary, adjust the projector by
referring to Section 11.
Selecting the INPUT TEST on the game test
mode menu screen causes the screen (on
which each switch is tested) to be displayed.
Press each switch. If the display beside each
switch indicates "ON," the switch and wir-
ing connections are satisfactory.
������������������C.R.T.�TEST��1/2
�����1����������������������������������32
ＲＥＤ
ＧＲＥＥＮ
ＢＬＵＥ
ＷＨＩＴＥ
PRESS�TEST�BUTTON�TO�CONTINUE
�����������������C.R.T.�TEST��2/2
PRESS�TEST�BUTTON�TO�EXIT
INPUT TEST
��������������INPUT�TEST
���������PLAYER������1������2
���������TRIGGER����OFF����OFF
���������CHANGE�����OFF����OFF
���������PEDAL������OFF����OFF
���������GUN-X������00H����00H
���������GUN-Y������00H����00H
���������SCREEN������IN�����IN
���������START������OFF����OFF
���������SERVICE��������OFF
���������TEST�����������OFF
PRESS�TEST�AND�SERVICE�BUTTON�TO�EXIT