99
www.seuservice.com
Error 25
[DISPLAY] Error 25
Cannot access GD-ROM drive.
[CAUSE] (1) Unable to access GD-ROM DRIVE.
(2) The GD-ROM DRIVE cover is open.
[COUNTERMEASURES] (1) Verify that the GD CABLE and the power cable are
properly connected to the GD-ROM DRIVE.
(2) Close the GD-ROM cover securely.
Should the problem persist, the GD-ROM DRIVE
may be damaged.
Error 26
[DISPLAY] Error 26
Media board malfunctioning.
[CAUSE] KEY CHIP is not found.
[COUNTERMEASURES] Attach the proper KEY CHIP for the game.
Insert the KEY CHIP securely.
Error 27
[DISPLAY] Error 27
DIMM memory is not enough.
[CAUSE] (1) Insufcient DIMM MEMORY on DIMM BOARD.
(2) DIMM MEMORY is not connected securely.
[COUNTERMEASURES] (1) Provide a suitable amount of DIMM MEMORY for
the software.
(2) Verify that the DIMM MEMORY is connected
securely to the DIMM BOARD.
Caution 51
[DISPLAY] Caution 51
Wrong video output setting of horizontal scanning frequency.
[CAUSE] The game does not support horizontal sync frequency setting.
[COUNTERMEASURES] Change the No. 2�4 and 6�8 DIPSW correcty on the
CONNECTOR BOARD.
The monitor must support these frequencies.
(See "16-2 COMPOSITION OF GAME BOARD".)
Caution 52
[DISPLAY] Caution 52
Wrong video output setting of horizontal/vertical screen.
[CAUSE] The game does not support the vertical/horizontal screen
settings.
[COUNTERMEASURES] Change the No. 1 DIPSW on the CONNECTOR BOARD.
ON is for vertically placed monitor screens, OFF is for
horizontally placed monitor screens.
Change the monitor placement from vertical to horizontal or vice
versa if necessary.
(See "16-2 COMPOSITION OF GAME BOARD".)
To Next Page
Loading...
