66
www.seuservice.com
FIG. 9. 3 b OUTPUT TEST screen(DELUXE TYPE)
����������OUTPUT�TEST
���PLAYER�1�START�LAMP���OFF
���PLAYER�2�START�LAMP���OFF
���PLAYER�1�FOOT�PANEL���OFF
���PLAYER�2�FOOT�PANEL���OFF
���PLAYER�1�BILLBOARD����OFF
���PLAYER�2�BILLBOARD����OFF
->�EXIT
���SELECT�WITH�SERVICE�BUTTON
�����AND�PRESS�TEST�BUTTON
B. OUTPUT TEST
Select OUTPUT TEST to display the following screen and check the status of each lamp.
This test should be used periodically to check that the lamps are functioning correctly.
Press the SERVICE Button to move the cursor and the TEST Button to select. Displays ON
when selected.
Actual screen may differ for depending on cabinet type.
Perform the tests as follows.
PLAYER 1 START LAMP: Lights up the 1P START button.
PLAYER 2 START LAMP: Lights up the 2P START button ash.
PLAYER 1 FOOT PANEL: Lights up the 1P foot panel. Press the TEST Button to cycle
through the colors, in the order RED, BLUE, WHITE, RED.
PLAYER 2 FOOT PANEL: Lights up the 2P foot panel. Press the TEST Button to cycle
through the colors, in the order RED, BLUE, WHITE, RED.
PLAYER 1 BILLBOARD: Lights up the 1P Billboard. Press the TEST Button to cycle
through the colors, in the order RED, GREEN, YELLOW,
BLUE, PURPLE, AQUA, WHITE, RED.
PLAYER 2 BILLBOARD: Lights up the 2P Billboard. Press the TEST Button to cycle
through the colors, in the order RED, GREEN, YELLOW,
BLUE, PURPLE, AQUA, WHITE, RED.
Move the cursor to EXIT and press the TEST Button to return to the Game Test Menu screen.
To Next Page
Loading...
