Sena 10R User Manual

10R
10
3. Peel off the cover of the adhesive tape of the hook fastener for
main unit and attach it to the back plate of the main unit.
4. Attach the main unit using the hook and loop fasteners that you
lTTED-AKESURETHATTHEMAINUNITISlRMLYATTACHEDTOTHEHELMET
3.1.2 Using the Double Sided Adhesive Tapes for Main Unit
If you cannot attach the hook and loop fasteners to the helmet, you
can use double sided adhesive tape.
1. Clean the area on the left side of the helmet where you will attach
the double sided adhesive tapes with moistened towel and dry
thoroughly.
2. Peel off the cover from one side of the double sided adhesive
tapes for main unit and attach it to the back plate of the main unit.

Sena 10R Specifications

General

Bluetooth	Bluetooth 4.1
Talk time	10 hours
Operating temperature	-10°C to 55°C (14°F to 131°F)
Bluetooth Profiles	HFP, HSP, A2DP, AVRCP
Battery Life	10 hours talk time