Advanced Setup
700-1014 R002 3–5
10. In the DVR configuration confirmation dialog, click Yes to proceed.
11. Click Back in the Program Update and then System Settings menus to save and
exit the menus.
12. From the Configuration menu, click Title/Display, and in the Titles and Display
menu, update the text in the Main_Title field.
13. Click Back to save.
14. Remove the USB memory device.
15. If required, update the network settings.
16. Turn off the DVR, restart the DVR, and confirm that the new configuration
settings have been applied.
Figure 3-6
Load Configuration: Warning Message
Figure 3-7
Click Back to Save Configuration
Figure 3-8
Titles and Display Menus
To Next Page
Loading...
