105
Byte Description Range Examples/notes
Sample Dump Header (continued)
cc sample format oc corresponds to twelve bits linear
dd sample period LSbyte 00-7F see table below
dd sample period 00-7F
dd sample period MSbyte 00-7F
sample sample period, period, spread out
rate, kHz period, ns in hex to 7-bit bytes, LSB
rst
15.625 64000 FA 00 00 74 03
31.25 32000 7D 00 00 7A 01
41.667 24000 5D CO 04 3B 01
ee sample length LSbyte 00-7F
ee sample length 00-7F
ee sample length MSbyte 00-7 F
sus. loop start LSbyte 00-7F
sus. loop start 00-7F
sus. loop start MSbyte 00-7 F
gg sus. loop end LSbyte 00-7F
gg sus. loop end 00-7F
gg sus. loop end MSbyte 00-7F Length, loop start, and loop
end points are in words, with the
rst word in the sample being
word 00 00 00.
hh loop type 0 -1 0 = forwards only
1 = backward/forward
F7 End of Exclusive
When requested or commanded, the master sends the sample dump header.
When sending the header (or data packets) the LCD reads “TRANSMITTING
MIDI DATA....”
After sending the header, the master waits for two seconds for the slave to
decide if it will accept this dump.
Cancel Dump
FO System Exclusive
7E Common Non-real-time
nn Channel number (00-0F)
7D Cancel Dump
00 Packet number
F7 End of Exclusive
After the slave reads the sample dump header, if it decides not to accept the
dump, it sends the Cancel Dump command.
HOME
To Next Page
Loading...
