Sequential Prophet VS - ENVELOPE PARAMETERS

65
ENVELOPE SELECT
To select the mixer, lter, or amplier envelope for adjustment, press Envelope
Select.
The name of the selected envelope and point appear in the top line of the
display.
In the lower line of the display appears the rate for the selected point, or the
loop and repeat selections, depending on which parameter has been selected.
BASIC MIXER ENVELOPE
Before editing the mixer envelope, you may want to hear what all four
oscillators sound like when mixed equally, without the inuence of the mixer
envelope. The VS provides a basic mixer envelope which can be selected
without aecting the rest of the program.
To select the basic mixer envelope:
1. Select the desired program.
2. Hold down Enter and press 1.
Playing the keyboard reveals that the mixer envelope provides an equal mix
of all four oscillators through all four points. The mixer envelope rates are
unaected.
3. If desired, edit the mixer envelope rates and levels as described below.
POINT
1. If necessary, select the desired envelope with Envelope Select.
2. To select envelope point, press Point Select.
This increments the point number from 0 through 4. The LCD shows the
current envelope and envelope parameter.
3. To select point ^A, hold down the ALTERNATE RELEASE footswitch.
The LCD will tell you that "ALTERNATE RELEASE" is selected.
HOME

BACK