15
DISPLAY TRIM
Due to the nature of LCDs, this display can only be read clearly from certain
angles. As the VS may be mounted at dierent angles, it may be necessary to
adjust the LCD using a trimmer accessed, through a hole in the back panel.
1. Locate the small hole in the Prophet VS back panel at the top of the "E" in the
"SEQUENTIAL" logo.
2. Using a small screwdriver, adjust the potentiometer within this hole until the
display gives the best contrast for the current mounting angle.
Be careful not to push too hard with the screwdriver, or the potentiometer may
be pushed back too far, and made inaccessible.
3. Look at the display from several angles to make sure the adjustment is
suitable.
HOME
To Next Page
Loading...
