82
STORE
To store the new waveform switch Edit Waveform on and:
1. To choose a suitable location for the new waveform, use Review (as explained
above).
2. If desired, insert RAM cartridge and switch Cartridge on.
3. Review must be o.
4. Switch Store on.
This “freezes” the mixture set by the current joystick position, and prepares the
machine to store the waveform into RAM (internal or cartridge).
If Cartridge is o, the display reads:
STORE WAVE IN
INT 32 (ENTER)
If Cartridge is on and a ROM cartridge is in place, it will ask you to insert a
RAM cartridge.
When the RAM cartridge is selected and in place it will say:
STORE WAVEFORM
IN RAM CART xx
5. Select desired destination number (1-31) using the slider.
6. To exit, switch Store o.
7. To store the wave, press Enter.
This writes over the destination. The LCD displays the waveform mix ratios.
The new wave will now play in any program that uses it.
Note that this new user waveform can be used as a component of other new
waveforms.
To create waves, throw away theory and listen a lot.
HOME
To Next Page
Loading...
