Sequential Prophet VS - SECTION 11 - VOICE CONTROLS; UNISON;DETUNE AND GLIDE

73
SECTION 11
VOICE CONTROLS
UNISON/DETUNE
When Unison mode is on, all voices (eight if normal, four if Split or Double
mode) play only the lowest key played. This makes a “fat” sound which can
be even further enlarged through the detuning option. Unison creates thick
sounds because the voices do not actually play simultaneously. There is
always a certain minimum delay that causes the voices to be slightly out of
phase.
In Unison mode, you can’t play a chord. But Unison makes fast ris easier to
play, since only one note can be heard at a time.
1. To select Unison mode, press Unison.
UNISON OFF (or ON)
DETUNE AMT X (only if ON)
2. To switch Unison mode on/o, or adjust the detuning range, use the slider.
Unison mode is o when the slider is all the way down. Detuning can only be
adjusted when Unison/Detune is on. Detune range is 1-7 cents.
This detuning is for this program in Unison mode. In Double mode the entire
program can be detuned further.
GLIDE
Glide determines how long it takes to slide between notes. When 0, there is
no glide eect and the oscillators step instantly between keyboard semitones.
As Glide is increased, it takes longer for the oscillator pitch to change. This
introduces “portamento” between the notes, which can be subtle or quite
extreme.
11
HOME

BACK