27
Load Internal from Cartridge
To load one hundred programs or thirty-two waveforms from cartridge:
1. Switch Store on.
2. Switch Cartridge o.
3. Adjust the slider so the display reads:
COPY ALL PROGS or COPY ALL WAVES
TO INT. (enter) TO INT. (enter)
4. Press Enter.
The VS's internal programs or RAM waveforms are replaced with the
cartridge's current contents.
NAMING PROGRAMS
A program can have an eight-character name. When you store an edited
program, it keeps the name of the program from which it was derived until you
change it. The name can be changed at any time the program is selected. But
like any edit, to be retained, name changes must be specically stored.
To write a program name for the current program:
1. Press Name.
2. Select the rst character, using the slider.
The range of characters are A-Z (ALL CAPITALS), numbers 1 - 5, and a blank
space.
3. To move to the next character position, press Name.
4. If desired, store the program with the new name.
HOME
To Next Page
Loading...
